The high grade stainless steel used in construction of the heat exchanger,
allows the product to be connected directly to the swimming pool, without any concern for material degradation by the chlorinated water. Furthermore, use of a secondary loop and mixing valves,
and the associated costs, are eliminated.

Heating Gasmaster water heaters are certified for potable water applications.
In addition, the one pass heating capacity of the product enables it to supply hot water on demand,
and on a continuous basis. This feature eliminates the cost of providing a storage tank,
associated plumbing, while saving floor space.

The stainless steel construction, ability to produce continuous hot water, and
supplying hot water at an accuracy of ± 1 ºF allows the use of Gasmaster water heaters in this application. Again, expensive storage tanks and mixing valves are eliminated, while saving floor space.

Not only Gasmaster water heaters and boilers offer the highest efficiency,
they provide higher concentration of CO2 than conventional boilers. This features offers
the greenhouse owners significant savings, by eliminating the cost associated
with providing excess CO2 which is essential for this industry.

The stainless steel construction and unique combustion technology of Gasmaster boilers
and water heaters allows them to be installed for use Bio (digester) gas (e.g. water treatment plants).
This offers the owner significant cost savings in both the equipment cost, and energy consumption.
In addition, use of Gasmaster products eliminates the periodic (in most cases annual)
replacement of the boiler, which is common in the industry due to corrosive nature of the bio gas.

The unique operating characteristics of Gasmaster products, allows the same boiler to be used simultaneously for both space heating and hot water (potable water) applications within the same building. This feature offers the owner significant savings in installation cost, while saving floor space.

Gasmaster Industries units use constructed entirely of 316L Stainless Steel.
These units provide ultra pure hot water used in several applications including: electronics
manufacturing, plating, food manufacturing, medical, pharmaceutical, laboratories,
cosmetics and other industries. Due to the construction and design of the GMI units
the transfer of ions into De-Ionized water does not occur, nor does any
contamination occur in either Distilled or RO water as it passes through the GMI unit.